5x100 VW Polo Rear Stub Axle & Wheel bearing Upgrade Kit 256mm Non-ABS for MK3 & Corrado VR6

Autotech now provides everything needed to mount MK4 R32 Rear Brakes on your MK3 GTI/Jetta VR6 or Corrado VR6. The MK4 Rear 256mm vented rotor out performs and actually saves 1/2 lb from the solid 226mm stock MK3/Corrado rotor!


Another huge benefit is ditching the MK1-MK3 style "rotor mounted" rear wheel bearing and going to the MK4 style "hub mounted" rear wheel bearing. The Polo uses a MK3 style rear axle beam but MK4 style brakes so the Polo parts are essential to getting this brake/hub upgrade accomplished. These parts are almost impossible to find in the USA for obvious reasons.


Keep in mind this kit is for NON ABS cars, a custom ring would have to be machined to mount on the back side of the hub to retain ABS.
This kit will widen your track each side by 9.7mm (the width of the lupo GTI adapter plate).



Included: 2 Polo Stub axles, 2 Polo 5x100 Hubs with wheel bearings, 2 Lupo GTI adapter plates for 256mm calipers, 2 axle nuts, 2 hub caps, 8 stub axle bolts, 4 caliper spacers (6mm), and 4 caliper carrier mount bolts.


Not included: MK4 R32 256mm x 20mm vented rotors, MK4 R32 Caliper carriers and Calipers, B5 Passat/Auotech rear brake lines. See related parts (above)